Rabu, 01 April 2015

Essential Tips For Laptop Screen Repair Houston

By Lelia Hall


For options with broken laptop display unit, you can easily attach this portable PC to an external monitor, buy a new one or even fix the screen. The best of this option is laptop screen repair Houston. While removing the broken display unit, don't be afraid, just make sure that you don't break anything in there and it's recommended you document every step you take during the repair process. These steps are very useful when it comes to putting everything back together.

The first step is to establish whether you really need a new screen. With the laptop dropping or dropping something heavy on it, the VDU could fracture so you will first need to diagnose. With the use of a VGA cable, connect the laptop to an external monitor to verify that all the other components of the laptop are working and that it's only the display that has a problem.

The display backlight keeps showing some flickers and afterwards shuts down after a few minutes of use and trying to start all over again does not come back at all. You can still see some faint images, and then you find out that the problem could be the inverter(the small board that supplies power to the backlight). This board cost around a hundred dollars, hence consider replacing it first. This may still not solve the problem, so finally consider checking the backlight.

The first step is getting the display unit bezel off. You will be required to disconnect the power supply plus remove the battery. With a lot of care, examine the bezel around the VDU. It's by removing the bezel that you can use the screws that hold the screen panel situated properly.

After removing the hidden screws using the metal blades to pop them loose, you can now work your way around the bezel with plastic plugger. Note that depending on the manufacturer as well as the model, it may lack the cushions plus the hidden screws. Here the bezel may just snap onto the lid or even held in place with double-sided tape. You will be required to adapt the procedure to get the best way to remove the VDU in regard to your specific laptop.

You will need the screen number for a purchase of a direct match replacement. Be sure to remove the power cable, as well as the battery, prior to any operation in regard to removing the VDU. The tool you may need to use include a small bit screwdriver, very little flat screwdriver, as well as a knife.

The third step concerns the installation of the brand new LCD. You will have to order brand new screws. When they arrive, make sure that they match the old ones. Think of checking if the dimensions, mounting brackets, as well as the connectors match, and then you are ready to go to the display unit to install. Begin by connecting the new display panel to the cable. Remember to carefully place the panel in the lid and secure it using the right screws.

If you accidentally damaged the laptop display and the warranty is still active, then know it's covered. You shouldn't try fixing it yourself, but you need to contact the manufacturer, the dealer or a professional in Houston to get it repaired under the warranty. However, if the warranty period is over, then you have no choice but to get the screen working again with the help of an expert.




About the Author:



Tidak ada komentar:

Posting Komentar