Any company that employs staff is plagued with keeping track of their employees' time and attendance. Using a manual attendance register is often not reliable and open to abuse by the very staff that they need to monitor. A good solution is to install easy time clock software that can keep an accurate track of staff movements. It allows management to keep control of staff and monitor their work hours.
Workers that are not making their weekly attendance requirement will be able to be dealt with in an appropriate manner, correcting any tardiness and slacking and eliminating time wasting. This will ultimately improve productivity within the company. Staff morale could improve as a result.
In the past supervisors or staff were trusted to manually capture their arrival and departures in a register. This was not a reliable or accurate method as it was far too easy to cover up tardiness or slacking. Staff could abuse the system and claim that they had worked more overtime than they actually had.
Supervisors that were less than honest had the control and could easily lie in the old system. They could show bias towards particular staff members, altering times to either favour or penalise them as they felt like doing. Besides the obvious matter of unfairness to the staff member that is now losing time that they worked, it's stealing and should be considered as such.
The risk of abuse is reduced immediately an automated clocking system is installed. There is no longer an opportunity in the workplace for time cheaters. Data that is collected is protected within the system, readily available to those that require it as well as being updated constantly with no more delays while head office waits for an outlying branch to send over information. Manual calculations for wages are no longer needed upgrading accuracy and re-establish fair business practices.
The readers are usually linked to the main computer system using 3G or wireless internet, maintain the correct time and date and allowing for remote access and repairs. It is a cost-effective and reliable method of running the devices. This also means that the data is instantly available and various reports can be set up from the software. Levels of access to the system and data is also possible.
Readers can be installed at the main entrances to the premises as well as secure areas because they not only control arrival, departure and attendance, they also control access if correctly set up and linked to a door or gate. Once the worker places his finger on the reader and it reads the fingerprint, he is identified and his time is linked to his file. If the staff member does not have access to that particular area or is only allowed in during specific times, the system does not allow the access controlled door or gate to open.
While manual clock cards are still open to abuse in some way, the biometric clocking system is practically foolproof. The workforce is required to have their fingerprints scanned and linked to their identity. Within the system, everything relevant pertaining to that staff member is recorded. Their position, the shifts they are expected to work, their annual leave days as well as their pay rate, depending on the chosen program.
Workers that are not making their weekly attendance requirement will be able to be dealt with in an appropriate manner, correcting any tardiness and slacking and eliminating time wasting. This will ultimately improve productivity within the company. Staff morale could improve as a result.
In the past supervisors or staff were trusted to manually capture their arrival and departures in a register. This was not a reliable or accurate method as it was far too easy to cover up tardiness or slacking. Staff could abuse the system and claim that they had worked more overtime than they actually had.
Supervisors that were less than honest had the control and could easily lie in the old system. They could show bias towards particular staff members, altering times to either favour or penalise them as they felt like doing. Besides the obvious matter of unfairness to the staff member that is now losing time that they worked, it's stealing and should be considered as such.
The risk of abuse is reduced immediately an automated clocking system is installed. There is no longer an opportunity in the workplace for time cheaters. Data that is collected is protected within the system, readily available to those that require it as well as being updated constantly with no more delays while head office waits for an outlying branch to send over information. Manual calculations for wages are no longer needed upgrading accuracy and re-establish fair business practices.
The readers are usually linked to the main computer system using 3G or wireless internet, maintain the correct time and date and allowing for remote access and repairs. It is a cost-effective and reliable method of running the devices. This also means that the data is instantly available and various reports can be set up from the software. Levels of access to the system and data is also possible.
Readers can be installed at the main entrances to the premises as well as secure areas because they not only control arrival, departure and attendance, they also control access if correctly set up and linked to a door or gate. Once the worker places his finger on the reader and it reads the fingerprint, he is identified and his time is linked to his file. If the staff member does not have access to that particular area or is only allowed in during specific times, the system does not allow the access controlled door or gate to open.
While manual clock cards are still open to abuse in some way, the biometric clocking system is practically foolproof. The workforce is required to have their fingerprints scanned and linked to their identity. Within the system, everything relevant pertaining to that staff member is recorded. Their position, the shifts they are expected to work, their annual leave days as well as their pay rate, depending on the chosen program.
About the Author:
Find details about the benefits of employee attendance software and more info about easy time clock software at http://www.pctimeclock.com right now.
Tidak ada komentar:
Posting Komentar